Installation Guide For Trone Fountina Toilet

Trone is a brand that is widely recognized for manufacturing high-quality toilets. If you're planning to install your new Trone Fountina, it can be quite overwhelming initially. However, with the right instructions and tools, the process can be made much simpler. To make things easier for you, we created a comprehensive installation guide for Trone Fountina bidet toilet.

Image of Trone Fountina bidet toilet.

With its easy-to-follow, step-by-step process, this guide guarantees accurate installation of Trone Fountina bidet toilet.

Installation Condition Requirements

  • To install a bidet toilet, you'll require a nearby wall outlet for the power supply and a water supply. Instead of supplying the water directly into the toilet tank, you can connect it to the bidet toilet's undercarriage.
  • Determine the rough-in measurement by measuring the distance from the centerline of the closet flange to the wall.
  • Ensure that the static water pressure falls between 14.5 psi and 108.78 psi, with the minimum pressure being no less than 14.5 psi.
  • The water supply temperature falls within the range of 41 to 95 degrees Fahrenheit.
  • The water flow rate is at least 4.7 gallons (18 liters) per minute.

Step-By-Step Installation Guide

  1. Center the wax ring over the closet flange with the flange facing down.
  2. Install closet bolts.
  3. Gently pull out the Fountina Bidet Seat to remove it from the box.
  4. Place the bidet seat across the toilet bowl and ensure it does not get in the way.
  5. Set the toilet unit over the wax ring. Since the toilet may be heavy, we recommend having two people doing this to ensure balance.
  6. Align the holes on the bottom of the bowl with the closet Bolts and place the bowl in position.
  7. Fasten the bowl by using a ratchet wrench or a comparable tool to tighten the nuts. Be cautious not to over-tighten, as it could damage the porcelain or base.
  8. Mount the specialized angle valve on the tap water pipe.
  9. Join the valve with the inlet hose and open it to check for water leakage.
  10. Hook the battery pack together.
  11. Insert the seat pegs back into the designated holes to reinstall the bidet seat.
  12. Connect the cord to the power source and reset the CFGI by pressing the two larger buttons on the plug.

For more detailed instructions for Trone Foutina installation, refer to the User Manual in your package or download it here.



Explore more

Share this