Trone is a brand that provides top-notch toilets and a wide variety of bathroom products with several features. If you're planning to install a new toilet, it may seem challenging initially, but it's easier with proper instructions and tools. Trone offers a comprehensive installation guide for Trone Neodoro, an excellent resource for anyone who wants to install these toilets in their bathroom.
The guide provides a detailed step-by-step process that is easy to follow, ensuring you get the job done right the first time. So, if you want a hassle-free installation experience, we have you covered with our comprehensive toilet installation guide.
Installation Condition Requirements
- To use the bidet toilet, you will require a power source near the toilet and a water supply. Instead of connecting it to the toilet tank, you will need to attach it to the undercarriage of the bidet toilet.
- Determine the rough-in by measuring the distance from the centerline of the closet flange to the wall.
- Ensure that the static water pressure is not less than 14.5 psi and does not exceed 108.78 psi.
- Make sure that the water supply temperature falls within the range of 41 to 95 degrees Fahrenheit.
- Ensure that the water flow is not less than 4.7 gallons (18 liters) per minute.
Step-By-Step Installation Guide
- Place the wax ring over the closet flange with the flange down, ensuring it's centered for a proper fit.
- Fasten the closet bolts in place for a secure installation.
- Lift the Neodoro Bidet Seat out of the box by using a firm but gentle upward pulling motion.
- Position the bidet seat across the toilet bowl, making sure it is not obstructing the way.
- To install the toilet, lift the whole unit and position it over the wax ring. As the toilet can be heavy, it's better to have two people do this for better balance.
- Make sure that the holes at the bottom are in line with the Closet Bolts, and then place the bowl accordingly.
- Fasten the bowl by tightening the nuts with a ratchet wrench or a similar tool. Be careful not to over-tighten as it can cause damage to the porcelain or base.
- Mount the specialized angle valve into the tap water pipe.
- Attach the valve to the inlet hose and turn it on to inspect for any water leaks.
- Connect the battery pack together.
- Reinstall the bidet seat by aligning and inserting the seat pegs into their respective holes.
- Connect the cord to the power outlet and reset the CFGI by pressing the two larger buttons on the plug.
For more detailed instructions for Trone installation, refer to the User Manual in your package or download it here.